Solved Projected Geometry From Assembly Not Updating In Models Here you go, assembly and parts, along with the master file that controls everything (inventor 2021 format). make whatever changes you want in the master file (within reason), then go back to the assembly and click update voilà, all parts are altered per your changes, and positions changed in the assembly. All definition and editing is done in one file (the master file), and the individual parts and the assembly just do what the master says. open the assembly and open the master, make any changes you wish in the master, hit update in the assembly and it's all updated. nothing adaptive. 02 01 2016 06:56 am.
Solved Projected Geometry From Assembly Not Updating In Models Have seen this many times, but have not found any propery way to fix it. my workaround is to delete the projection constrain, move the line to the side, project endpoints of the base geometry and constrain the enpoints of the line to those. then you keep the line id and all downstream dependencies survive. Project the derived planes or sketches. check manually adaptivity in main assembly file for this element: click right mouse button on name of element that is not updating projected geometry in model tree. from context menu check back 'adaptive'. the connecting will be restored between parts immediately and projected geometry will be updated. You can project the edges of a component cut by an assembly section to the sketch plane if the part would intersect the sketch plane. projected cut edges are not associative in a sketch. the geometry is a “snapshot” of the geometry when projected, and if the parent geometry changes, the projected geometry does not update. Why is projected geometry locked? when working in an assembly, i edit a part, create new sketch and project geometry to the sketch plane. sometimes the geometry appears with the color yellow and will move location when the original geometry is moved. sometimes the geometry appears with the color blue and will have the locked constraints with it.
Solved Projected Geometry Not Updating Autodesk Community You can project the edges of a component cut by an assembly section to the sketch plane if the part would intersect the sketch plane. projected cut edges are not associative in a sketch. the geometry is a “snapshot” of the geometry when projected, and if the parent geometry changes, the projected geometry does not update. Why is projected geometry locked? when working in an assembly, i edit a part, create new sketch and project geometry to the sketch plane. sometimes the geometry appears with the color yellow and will move location when the original geometry is moved. sometimes the geometry appears with the color blue and will have the locked constraints with it. "cross part projection failed because the sketch is in a part which is adaptive in another assembly" message in inventor when projecting geometry into a sketch from another part in an assembly. follow these step to remove the adaptivity in the active assembly: click tools > options > document settings. un check adaptively used in assembly option > ok. if the above message appears, it can also. Start a new sketch and project geometry as needed. in your case you need a 3d path so start a 3d sketch and include geometry. if you want to test the model change the original then go back to the derived component. you will see that the update lightening bolt is lit up indicating that the derived part needs to be updated.
Solved Projecting Sketch Geometry Into Assembly Sketch Doesn T Update "cross part projection failed because the sketch is in a part which is adaptive in another assembly" message in inventor when projecting geometry into a sketch from another part in an assembly. follow these step to remove the adaptivity in the active assembly: click tools > options > document settings. un check adaptively used in assembly option > ok. if the above message appears, it can also. Start a new sketch and project geometry as needed. in your case you need a 3d path so start a 3d sketch and include geometry. if you want to test the model change the original then go back to the derived component. you will see that the update lightening bolt is lit up indicating that the derived part needs to be updated.
Solved Projected Geometry Not Updating Autodesk Community
Solved Projecting Sketch Geometry Into Assembly Sketch Doesn T Update