Solved Faces Flip After Rotating The Entire Element Autodesk Community I've rotated the rock on the right about the z axis of the 3ds max world coordinate system 180 degrees. well, below is the result. the shadow that appears on the right side rock, clearly reveals that the surfaces are indeed flipped. i often have this issue after unintentional object edits. 1. open the 3d view, ensure all elements you wish to rotate are visible, select everything that you wish to rotate, click create group. 2. navigate back to floor plan view, select group, start rotate tool. 3. rotate group as needed, then ungroup when complete.
Solved Faces Flip After Rotating The Entire Element Autodesk Community Next select rotate to true north . you should be able to toggle between true north and project north. if you don't want to mess this up, you can setup scopebox. rotate the scopebox by 25 degree to reflect where you want to rotate the view. then set the view to scope box and it will automatically rotate your plan. 02 21 2014 02:05 am. try this: select the mass object > modify mass > edit in place image 001. edit in place > select again the whole object (cross selection) > form element > pick new host > choose face and drag of a face image 002,003 and 004. or choose work plane and choose the new host plane image 005. constantin stroescu. You can enter the rotation command followed by all of the parts that you want it to apply to. the following example would add 90°(ccw) to the rotation of c1, c2, c3, and c4. rotate r90 c1 c2 c3 c4 if you wanted them all to have the exact angle regardless of their starting positions you can specify the absolute angle to be used. rotate =r90 c1. Each speaker in the stack is rotated (up or down) at a very specific angle relative to the one above. then the entire stack (i have used up to 14) are rotated in plan. its behavior is a bit like a bicycle chain in terms of the fixed relationship between elements and the interrrelated rotation in one axis of each element.
Solved Faces Flip After Rotating The Entire Element Autodesk Community You can enter the rotation command followed by all of the parts that you want it to apply to. the following example would add 90°(ccw) to the rotation of c1, c2, c3, and c4. rotate r90 c1 c2 c3 c4 if you wanted them all to have the exact angle regardless of their starting positions you can specify the absolute angle to be used. rotate =r90 c1. Each speaker in the stack is rotated (up or down) at a very specific angle relative to the one above. then the entire stack (i have used up to 14) are rotated in plan. its behavior is a bit like a bicycle chain in terms of the fixed relationship between elements and the interrrelated rotation in one axis of each element. Here is the code: (the assembly includes a wall, i find the location of the wall and try to rotate the assembly origin based on this point and the axis which crosses this point and is towards z direction, please note that i pick the element based on its face.) import autodesk.revit.db as db from autodesk.revit.db import *. Solution: use the following steps to locate the revit model correctly: open a floor plan view in revit. link georeferenced dwg file in revit. adjust the position of the dwg file using move rotate align features. go to manage tab. select "acquire coordinates" option from the "coordinates" drop down list. select adjusted dwg file.