Projected Sketch Geometry Not Updating Autodesk Community Here you go, assembly and parts, along with the master file that controls everything (inventor 2021 format). make whatever changes you want in the master file (within reason), then go back to the assembly and click update voilà, all parts are altered per your changes, and positions changed in the assembly. Update: found a solution workaround! all i did was delete all mirrored sketch geometry and extruded that corner of stuff. then in the modeling space, i mirrored the cutout features over the plane between the two middle mounting holes first and then mirrored the previous mirrored feature and the original extrusion over the yz plane.
Projected Sketch Geometry Not Updating Autodesk Community Have seen this many times, but have not found any propery way to fix it. my workaround is to delete the projection constrain, move the line to the side, project endpoints of the base geometry and constrain the enpoints of the line to those. then you keep the line id and all downstream dependencies survive. Make sure these two options are checked off in your application options (likely the projected geometry has been given "lock" constraints): 06 25 2015 09:27 am. they were not checked, so i just checked them. but the projected geometry didn't have the little lock icon showing and it was yellow, not purple. Straight from the 2013 wiki help. you can project the edges of a component cut by an assembly section to the sketch plane if the part would intersect the sketch plane. projected cut edges are not associative in a sketch. the geometry is a " snapshot " of the geometry when projected, and if the parent geometry changes, does not update. All definition and editing is done in one file (the master file), and the individual parts and the assembly just do what the master says. open the assembly and open the master, make any changes you wish in the master, hit update in the assembly and it's all updated. nothing adaptive. sam b.
Projected Geometry Not Updating Autodesk Community Straight from the 2013 wiki help. you can project the edges of a component cut by an assembly section to the sketch plane if the part would intersect the sketch plane. projected cut edges are not associative in a sketch. the geometry is a " snapshot " of the geometry when projected, and if the parent geometry changes, does not update. All definition and editing is done in one file (the master file), and the individual parts and the assembly just do what the master says. open the assembly and open the master, make any changes you wish in the master, hit update in the assembly and it's all updated. nothing adaptive. sam b. I projected the geometry of the plugs on a sketch on a plane at one of the walls of the box. the projected geometry is visible and i could create rectangles for cut offs. now, when i move the pcb to another position, the projected geometry stays on the old position. i would like to see it changing and so moving the cut off automatically. Projected cut edges are not associative in a sketch. the geometry is a “snapshot” of the geometry when projected, and if the parent geometry changes, the projected geometry does not update. when you project all of the loops on a part face, changes to the parent feature or face, such as causing the loops to overlap, automatically trims the.
Solved Projected Geometry Not Updating Autodesk Community I projected the geometry of the plugs on a sketch on a plane at one of the walls of the box. the projected geometry is visible and i could create rectangles for cut offs. now, when i move the pcb to another position, the projected geometry stays on the old position. i would like to see it changing and so moving the cut off automatically. Projected cut edges are not associative in a sketch. the geometry is a “snapshot” of the geometry when projected, and if the parent geometry changes, the projected geometry does not update. when you project all of the loops on a part face, changes to the parent feature or face, such as causing the loops to overlap, automatically trims the.